Magnat Power Core Four

4-channel amplifier, stable at 2 ohms


The four-channel powerhouse also finds space in the flat slimline aluminium heat sink used for the Power Core range of products. Stable at two ohms, it comes with ample power reserves. Should this not be enough, a channel-mode switch will switch from four-channel to two-channel mode. A DUPE circuit directs the audio signal from Channels 1 and 2 with identical filter settings to Channels 3 and 4. The low-level outputs with sum signal from Channels 1 to 4 allow a subwoofer amplifier to be connected. The intense heat produced is not only counteracted by the noble slimline aluminium heat sink but also by an active fan. The case´s noble hairline finish has been adorned with an LED-illuminated Magnat logo badge and the engraved model designation.



Highlights

• Slimline design aluminium heatsink with engraved model name
• Nobel hairline finish
• Magnat logo badge illuminated
• Protection circuit that safeguards against short circuits, DC-offset and overheating
• Green operation and red protection indication LED
• Cooling by fan for an optimized heat carrying off (ONE Limited, FOUR, FOUR.S)


TWO/FOUR/FOUR.S

• 2 ohm stable
• Full feature XO/ Bandpass:
   • Variable high pass 10 – 200 Hz (12 dB per octave)
   • Variable low pass 30 – 150 Hz (12 dB per octave)
   • Variable bass boost 0...12 dB at 45 Hz
• Bridge/Tri-mode capability
• Encapsulated potentiometers with metal shaft
• Encapsulated power and speaker connectors (FOUR, FOUR.S)
• Channel mode selector switch (4/2) (FOUR, FOUR.S)
• DUPE circuit forwards the preamplifier audio signal of CH1 /2 to CH3/4 with the same filter settings(FOUR, FOUR.S)
• Low level RCA outputs provide summing signal of channel 1 to 4 for use with a subwoofer amplifier (FOUR, FOUR.S)
• Low level pass trough RCA jacks (TWO)


Features:

• Max power output into 4 ohms, 14.4V: 4 x 250 W/2 x 700 W
• RMS power output into 4 ohms, 14.4V: 4 x 100 W/2 x 280 W
• Max power output into 2 ohms, 14.4V: 4 x 350 W
• RMS power output into 2 ohms, 14.4V: 4 x 140 W
• Frequency response: 5 Hz – 50 kHz (-3 dB)
• THD: < 0,05 % (1 kHz)
• Signal-to-noise ratio (A-weighted): > 100 dB
• Input sensitivity: 0.2 – 6 V
• Input impedance: 20 k Ohms
• Power supply: 12 V negative ground
• Dimensions (W x H x D): 382 x 41 x 198 mm

EAN: 4O188431334O9