Magnat Power Core Four S

4-channel amplifier, stable at 2 ohms


The Power Core Four S possesses features that are largely identical to those of the Power Core Four. It therefore comes with channel-mode switching, DUPE circuit for forwarding the audio signal from Channels 1 and 2 to Channels 3 and 4 with identical filter settings and low-level outputs with sum signal for connecting subwoofer amplifiers. Also stable at two ohms, the Four S is a little less powerful than the Four, but the pay-off is that the four-channel amplifier is slightly narrower and only 41 mm high. An active fan also supports heat dissipation here. The Power Core Four S also naturally comes with the designer aluminium heat sink with noble hairline finish, illuminated Magnat logo badge and model-designation engraving.


Highlights

• Slimline design aluminium heatsink with engraved model name
• Nobel hairline finish
• Magnat logo badge illuminated
• Protection circuit that safeguards against short circuits, DC-offset and overheating
• Green operation and red protection indication LED
• Cooling by fan for an optimized heat carrying off (ONE Limited, FOUR, FOUR.S)


TWO/FOUR/FOUR.S

• 2 ohm stable
• Full feature XO/ Bandpass:
   • Variable high pass 10 – 200 Hz (12 dB per octave)
   • Variable low pass 30 – 150 Hz (12 dB per octave)
   • Variable bass boost 0...12 dB at 45 Hz
• Bridge/Tri-mode capability
• Encapsulated potentiometers with metal shaft
• Encapsulated power and speaker connectors (FOUR, FOUR.S)
• Channel mode selector switch (4/2) (FOUR, FOUR.S)
• DUPE circuit forwards the preamplifier audio signal of CH1 /2 to CH3/4 with the same filter settings(FOUR, FOUR.S)
• Low level RCA outputs provide summing signal of channel 1 to 4 for use with a subwoofer amplifier (FOUR, FOUR.S)
• Low level pass trough RCA jacks (TWO)


Features:

• Max power output into 4 ohms, 14.4V: 4 x 180 W/2 x 500 W
• RMS power output into 4 ohms, 14.4V: 4 x 80 W/2 x 200 W
• Max power output into 2 ohms, 14.4V: 4 x 250 W
• RMS power output into 2 ohms, 14.4V: 4 x 100 W
• Frequency response: 5 Hz – 50 kHz (-3 dB)
• THD: < 0,05 % (1 kHz)
• Signal-to-noise ratio (A-weighted): > 100 dB
• Input sensitivity: 0.2 – 6 V
• Input impedance: 20 k Ohms
• Power supply: 12 V negative ground
• Dimensions (W x H x D): 322 x 41 x 198 mm

EAN: 4O18843133454