Magnat Power Core Two

2-channel amplifier, stable at 2 ohms


The Pro Core Two two-channel amplifier runs stably with maximum power output at two ohms. The slimline aluminium heat sink with noble hairline finish, LED-illuminated Magnat logo badge and engraved model designation does not only make it look attractive but also means that it possesses a very low height. The Power Core Two´s special features include encapsulated potentiometers with metal shafts, bridge-/tri-mode settings and low-level outputs for looping through additional amplifiers. An active fan supports optimum heat dissipation while a protective circuit prevents overheating, DC offset and short circuits.


Highlights

• Slimline design aluminium heatsink with engraved model name
• Nobel hairline finish
• Magnat logo badge illuminated
• Protection circuit that safeguards against short circuits, DC-offset and overheating
• Green operation and red protection indication LED
• Cooling by fan for an optimized heat carrying off (ONE Limited, FOUR, FOUR.S)


TWO/FOUR/FOUR.S

• 2 ohm stable
• Full feature XO/ Bandpass:
   • Variable high pass 10 – 200 Hz (12 dB per octave)
   • Variable low pass 30 – 150 Hz (12 dB per octave)
   • Variable bass boost 0...12 dB at 45 Hz
• Bridge/Tri-mode capability
• Encapsulated potentiometers with metal shaft
• Encapsulated power and speaker connectors (FOUR, FOUR.S)
• Channel mode selector switch (4/2) (FOUR, FOUR.S)
• DUPE circuit forwards the preamplifier audio signal of CH1 /2 to CH3/4 with the same filter settings(FOUR, FOUR.S)
• Low level RCA outputs provide summing signal of channel 1 to 4 for use with a subwoofer amplifier (FOUR, FOUR.S)
• Low level pass trough RCA jacks (TWO)


Features:

• Max power output into 4 ohms, 14.4V: 2 x 375 W/1 x 1000 W
• RMS power output into 4 ohms, 14.4V: 2 x 125 W/1 x 400 W
• Max power output into 2 ohms, 14.4V: 2 x 500 W
• RMS power output into 2 ohms, 14.4V: 2 x 200 W
• Frequency response: 5 Hz – 50 kHz (-3 dB)
• THD: < 0,05 % (1 kHz)
• Signal-to-noise ratio (A-weighted): > 100 dB
• Input sensitivity: 0.2 – 6 V
• Input impedance: 20 k Ohms
• Power supply: 12 V negative ground
• Dimensions (W x H x D): 322 x 41 x 198 mm

EAN: 4O188431332O1